|
QuiqLite Stealth White/Red Light |
 |
 |
 |
|
|
|
Stealth, White/Red LED configuration was designed as a tactical hands-free light source. The white LED is used for normal reading and writing needs were the amount of light output is not a concern. The Red LED was added as a tactical light for those situations when your night vision needs to be kept in tact and your position needs to be concealed as best as possible. Stealth is also equipped with a 10 minute auto-off battery saving feature, Safety Strobe Providing hours of continual light and a new auto-off override feature for continual light when you need it.
|
White/Red LED configurations:
- High Strength CNC’d aluminum housing
- Water resistant O-ring housing with epoxy encased circuit board
- Instant On/Off with the push of a button
- Independent L.E.D. activation
- 10 minute auto-off timer with override function
- 120 ⁰ adjustable blacked-out L.E.D. bezel with anti-glare visor
- Non reflective anodized finish
- Safety Strobe
- 360⁰ removable rotating clip
- 180⁰ adjustable L.E.D. arm
- Lifetime Warranty
Operating Functions:
- 1st push turns on White. L.E.D only
- 2nd push turns off White LED and turns on Red LED only
- 3 push turns all LEDs off
- 10 minute auto-off timer
Strobe Function:
- Press and hold button down for 2 seconds to activate Safety Strobe (no auto-off timer)
- Press button again to turn off strobe
White LED Auto-Off Override Function:
- While strobing, press and hold button for 2 seconds.
- White Strobe will stop and White LED will activate, indicating
- *10 minute auto-off time deactivated*
- Push button again and White LED will turn Off
Red LED Auto-ff Override Function:
- While override White LED is activated, press and hold button for 2 seconds
- White LED will turn off and Red LED will activate, indicating
- *10 minute auto-off timer deactivated*
- Press button again and all LED will turn off
*Stealth will reset to normal operating functions after each use*
|
|
|
